Road Spacing Guide

For proper spacing, you will use DIRT ROADS as a "pencil line", and draw them to the specified length (dollar amount) as noted below. You can upgrade those roads later to medium or high density when you're ready to increase your density. You do not want to use high density roads or avenues for this. It's too expensive and the dollar amounts will be much different.

** Flat Terrain **

Larger Blocks
For each additional building in a row, add $196, thus 
5 x 2 = $1016 x $436, 
6 x 2 = $1212 x $436
7 x 2 = $1408 x $436

Adjustments for avenues
Avenues cost an extra $25 per side. So a 4 x 2 with an avenue on one side would be $820 + $25 = $845 

or with avenues on both sides = $820 + $25 + $25 = $870

** Uneven Terrain **

IMPORTANT! : Adjust for steepness

The numbers above were based on flat land.  If your plot has some slope to it, you'll need to add another $5-$10 per side. For example, instead of $244 (single depth), I like to use $250. For double depth, I use $440. These numbers are rounded off so they're a little bit easier to remember too.

How to find the “center” point in the City:
(Square roads layout)

Draw dirt road from corner of map costing $2015 - $2016. Then draw a road toward the center of map costing the same ($2015 - $2016). Then draw a road costing $440 - $441 from the center point if you want to make back to back HD streets. Draw slightly longer roads ($466 - $486) if you will be using avenues.

(Circle roads layout)
Draw dirt road from corner of map costing $2015 - $2016. Then draw a road toward the center of map costing the same ($2015 - $2016). (same as above) Then draw a road from the center point of the city costing $300 minimum so that the circular road will accommodate 3 HD buildings.

Switch to circle road tool and place your mouse at the end of the $300 road. Drag your mouse back to the center point of the map to create your first circle. Switch back to straight road tool, and draw an extension road off of the $300 road costing $462. Switch back to circle road tool, and drag your circle road back to the center point in the city to create your second circle.

Single High Density
ave to street - $272

street to street - $246 *yes (back to back medic center test) better if use $248
ave to ave - $294

Double High Density Zone
street to street - $440
st to ave - $466
ave to ave - $486

University
Front to Back,
Ave to Street, $682
Street to Street $656
side2side w/ room for additions
Ave to Street, $764
Street to Street $736

Convention Center
to draw a road behind convention center
ave to convention center to street - $420
length of convention center is $450
depth: $414
side of convention center must be $260 away in order to build

Stadium
depth: $495
length: $757